机床导轨软带(耐磨片)
The lathe guide is taken softly (wear-resistingslice)

F4-3导轨软带	F4-4导轨软带

    富朗橡塑产业在发展高性能非金属轴承产品方面已占据领先地位，富朗机床导轨软带（耐磨片）是特殊 方面的PTFE和增强用的充填剂的混合物，以向用户提供自润滑寿命长和多种用途的轴承材料。     富朗机床导轨软带数种轴承材料中的一种，它专门针对机床制造商和修复商。富朗橡塑料材料具有许多 奇特的能力，例如对冲击和变形的抵抗，均匀的低摩擦力的保持能力。降低驱动能耗，对刀且受工作载荷 产生振动的缓冲，以用它固有的自润滑特性，这样就使我们能够信赖它在各种多变而宽阔的工作条件下其 备最高的性能。史目前广泛应用于机床纺织机械化工机械、建材机械、闸门、电梯的滑动带壮轴承等。     代理进口耐磨片，规格1.2*300，1.5*300，1.6*300，1.7*300，2.0*300。
高耐磨:耐磨性是铸铁导轨的10倍,导轨精度保持性好;
低摩擦:摩擦系数＜0.04,公为铸铁导轨的1/3,大大降低了驱动能耗;
无爬行:动,静摩擦系数接近,微动进给定位好,运行平稳;
吸震好:可减少噪音和震动,提高加工精度;
润滑佳:自润滑性能好,即使润滑系统出现故障也可避免导轨擦伤;
维修易:因软带硬度较金属低得多,磨损主要在软带上,维修只需更换软带,彻底避免了床身导轨中凹; Rich bright Fluorine moulds the industry and already occupies leading position in the nonmetal bearing products of high performance of development, rich bright lathe guide soft to it brings to be special PTFE and whom enhancement spend of respect fill with mixture of pharmaceutical, in order to offer the bearing material lubricating longe-lived and many kinds of uses by oneself to users.
Rich bright lathe guide soft to bring several bearing one of of material, specially to lathe manufacturer and repairing trader it. The rich bright fluoroplastics material has a lot of peculiar ability , for example to assaulting and resisting out of shape, keeping ability of even low frictional force. Reduce and drive energy consumption, and is produced the buffer of vibration the knife by the working load, in order to use it inherent lubricated characteristic since , make us can trust it changeable and their prepare against supreme performance under the wide condition of work in various kinds of like this. History apply lathe fabrics machine chemical machinery , building materials machinery , gate , sliding of lift bring strong bearing ,etc. extensively at present.
Act for importation wear-resisting block, specification 1. 2*300,1. 5*300,1. 6*300,1. 7*300,2. 0*300.
It is high and wear-resisting : The wearability is 10 times of the casting iron guide , keeping of precision of the guide is good;
Low friction: Coefficient of friction <0. 04, it is 1/3 of the casting iron guide to be common, have reduced energy consumption of urging greatly ;
Have not crept : Work up, the quiet coefficient of friction is close , is it is it orientate to give to is it stock to work up a little well, operate steadily;
Suck and shake it well: Reducible noise and shaking , improve the machining accuracy ;
It is good to lubricate: Lubricating of good performancly, even if the lubricating system breaks down and can avoid the guide scotch ;
It is easy to maintain: Because soft to bring hardness to be low to much , wear and tear mainly soft to take than metal, is it is it change soft to lead to need only to maintain, have prevented from in the lathe bed guide completely concavly .